APPENDIXES

APPENDIXES

Flow Measurement

Variant 2. Standart
Calculation formulas

The water tank shown in Fig. A-FM.02, is shaped like a cylinder. The diameter of the tank is 1 meter. At the bottom of the tank there is a circular pointed hole with a diameter of 0.01 meter. The discharge coefficient of the opening is 0.60. If the tank is filled to a depth of 1 meter, as shown in Fig. A-FM.02, how long will it take to empty it?

Fig. A-1
Fig.A-FM.02 - How long will it take to empty it?

Formulas:

\[\sigma\cdot v(h)\cdot \Delta t=-S(h)\Delta h\]

\[\Delta t\to 0\]

\[-S(h)\frac{dh}{dt} = \sigma v(h)\]

\[v(h)=\sigma \mu \sqrt{2gh}\]

\[dt=\frac{-S(h)}{\sigma \mu \sqrt{2gh}}dh\]

\[t=\frac{1}{\sigma \mu \sqrt{2gh}}\int_{h}^{H}\frac{S(h)}{\sqrt{h}}dh\]

\[\]

\[\]

\[\]

Problem A-1.
How long will it take to empty it?

The water tank shown in Fig. A-FM.02, is shaped like a cylinder. The diameter of the tank is 1 meter. At the bottom of the tank there is a circular pointed hole with a diameter of 0.01 meter. The discharge coefficient of the opening is 0.60. If the tank is filled to a depth of 1 meter, as shown in Fig. A-FM.02, how long will it take to empty it?

\[H=1 m,\mu=0.62 , r=0.015 m, \rho = 1000 \frac{kg}{m^{3}}, g=9.81 \frac{m}{s^{2}} \]

Fig. A-1
Fig.A-FM.02 - How long will it take to empty it?

Counting

\[\sigma=\pi \cdot r ^{2}=3.1415 \cdot 0.015^{2} = 7.06858335 \cdot 10^{-4} m^{2}\]

\[S(h)=\pi \cdot h=3.1415 \cdot h m^{2}\]

\[t=\frac{1}{\sigma \mu \sqrt{2gh}}\int_{h}^{H}\frac{S(h)}{\sqrt{h}}dh\]

\[t=\frac{1}{\sigma \mu \sqrt{2gh}}\int_{h}^{H}\frac{S(h)}{\sqrt{h}}dh\]

\[h_D(H,h)=\frac{2\cdot h^{2}-3\cdot H\cdot h}{3\cdot h-6\cdot H} [m]\]

\[h_D(H,h)=\frac{2\cdot 7^{2}-3\cdot 7\cdot 7}{3\cdot 7-6\cdot 7} = 2.33 m \]

Fig. A-1
Fig.A-1.1 - The force of hydrostatic pressure on a rectangular surface.

Facts:

Resize the browser window to see how the content respond to the resizing.